Dimensions :
- S1 type/S2 type
- S3 Hole output type
Sizes Specifications :
| Motor power | LA | LZ | S | LR | LB | LE | LC | L | ||
| L1(Grade 1) | L2 (Grade 2) | L3(Grade 3) | ||||||||
| 3KW | 200 | 4-M12 | 35 (F7) | 82 | 114.3 (H7) | 15 | 188 | 351 | 425 | 470 |
| 4. 2KW | 215 | 4-M12 | 38/42 (F7) | 116 | 180 (H7) | 15 | 188 | 351 | 425 | 470 |
| 7.5KW | 235 | 4-M12 | 55 (F7) | 116 | 200 (H7) | 15 | 220 | 381 | 425 | 470 |
| 11KW | 265 | 4-M12 | 55 (F7) | 116 | 230 (H7) | 15 | 250 | 381 | 425 | 470 |
- The input end size in the figure is the common metric servo motor interface. If you need other special connection size, please contact sales.
- S1 type is S2 type remove flat key;Type S3 is hollow shaft output form.
- Special instructions are required when ordering Fig2 form.
Parameters :
| Specifications | Unit | Grade | Ratio | PX220 |
| Rated Outout Torque T2N | Nm | L1 | 3 | 1730 |
| 4 | 2270 | |||
| 5 | 2270 | |||
| 7 | 1610 | |||
| 10 | 1050 | |||
| L2 | 9 | 1730 | ||
| 15 | 2270 | |||
| 20 | 2270 | |||
| 25 | 2270 | |||
| 30 | 2270 | |||
| 35 | 2270 | |||
| 40 | 2270 | |||
| 50 | 2270 | |||
| 70 | 1610 | |||
| 100 | 1050 | |||
| L3 | 64 | 2270 | ||
| 80 | 2270 | |||
| 100 | 2270 | |||
| 150 | 2270 | |||
| 200 | 2270 | |||
| 250 | 2270 | |||
| 300 | 2270 | |||
| 350 | 2270 | |||
| 400 | 2270 | |||
| 500 | 2270 | |||
| 700 | 1610 | |||
| 1000 | 1050 | |||
| Fallure stopping torque T2B | Nm | L1,L2,L3 | 3~1000 | Two times of rated torque |
| Rated input speed n1N | rpm | L1,L2,L3 | 3~1000 | 2500 |
| Max input speed 1B | rpm | L1,L2,L3 | 3-1000 | 3500 |
| Backlash P1 | arcmin | L1 | 3~10 | ≤4 |
| L2 | 9~100 | ≤6 | ||
| L3 | 64~1000 | ≤7 | ||
| Backlash P2 | L1 | 3~10 | ≤6 | |
| L2 | 9~100 | ≤8 | ||
| L3 | 64~1000 | ≤10 | ||
| Allowable radial force F1 | N | L1,L2,L3 | 3~1000 | 60000 |
| Allowable axial force F2 | N | L1,L2,L3 | 3~1000 | 25000 |
| Lifetime | h | L1,L2,L3 | 3~1000 | 20000 |
| Efficiency n | % | L1 | 3~10 | 0.97 |
| L2 | 9~100 | 0.94 | ||
| L3 | 64~1000 | 0.91 | ||
| Weight | kg | L1 | 3~10 | 48 |
| L2 | 9~100 | 60 | ||
| L3 | 64~1000 | 72 | ||
| Noise Temperature | dB | L1,L2,L3 | 3~1000 | ≤75 |
| ⁰C | L1,L2,L3 | 3~1000 | - 20℃~+90℃ | |
| Moment of inertia of reducer | Grade | Ratio | PX220 | |
| Moment of inertia: | kg.cm² | L1 | 3-5 | 34.8 |
| 7-10 | 28.6 | |||
| L2 | 9-50 | 32.2 | ||
| 70-100 | 26.7 | |||
| L3 | 64-350 | 18.3 | ||
| 400-1000 | 13.7 | |||
Inquiry - Planetary Gearbox PX220
