Dimensions :
- S1 type/S2 type
- S3 Hole output type
Sizes Specifications :
| Motor power | LA | LZ | S | LR | LB | LE | LC | L | ||
| L1(Grade 1) | L2 (Grade 2) | L3(Grade 3) | ||||||||
| 750W | 90 | 4-M6 | 19 (F7) | 55 | 70 (H7) | 10 | 128 | 209 | 241 | 273 |
| 1.5KW | 145/130 | 4-M8 | 22/24 (F7) | 65 | 110 (H7) | 10 | 128 | 219 | 251 | 283 |
| 2.0KW | 165 | 4-M10 | 32 (F7) | 65 | 130 (H7) | 10 | 150 | 239 | 271 | 303 |
●The input end size in the figure is the common metric servo motor interface. If you need other special connection size, please contact sales.
●S1 type is S2 type remove flat key;Type S3 is hollow shaft output form.
●Special instructions are required when ordering Fig2 form.
Parameters :
| Specifications | Unit | Grade | Ratio | PX115 |
| Rated Outout Torque T2N | Nm | L1 | 3 | 212 |
| 4 | 268 | |||
| 5 | 268 | |||
| 7 | 212 | |||
| 10 | 95 | |||
| L2 | 9 | 212 | ||
| 15 | 268 | |||
| 20 | 268 | |||
| 25 | 268 | |||
| 30 | 268 | |||
| 35 | 268 | |||
| 40 | 268 | |||
| 50 | 268 | |||
| 70 | 212 | |||
| 100 | 95 | |||
| L3 | 64 | 268 | ||
| 80 | 268 | |||
| 100 | 268 | |||
| 150 | 268 | |||
| 200 | 268 | |||
| 250 | 268 | |||
| 300 | 268 | |||
| 350 | 268 | |||
| 400 | 268 | |||
| 500 | 268 | |||
| 700 | 212 | |||
| 1000 | 95 | |||
| Fallure stopping torque T2B | Nm | L1,L2,L3 | 3~1000 | Two times of rated torque |
| Rated input speed n1N | rpm | L1,L2,L3 | 3~1000 | 3500 |
| Max input speed 1B | rpm | L1,L2,L3 | 3-1000 | 7000 |
| Backlash P1 | arcmin | L1 | 3~10 | ≤4 |
| L2 | 9~100 | <6 | ||
| L3 | 64~1000 | ≤7 | ||
| Backlash P2 | L1 | 3~10 | ≤6 | |
| L2 | 9~100 | ≤8 | ||
| L3 | 64~1000 | ≤10 | ||
| Allowable radial force F1 | N | L1,L2,L3 | 3~1000 | 6700 |
| Allowable axial force F2 | N | L1,L2,L3 | 3~1000 | 3350 |
| Lifetime | h | L1,L2,L3 | 3~1000 | 20000 |
| Efficiency n | % | L1 | 3~10 | 0.97 |
| L2 | 9~100 | 0.94 | ||
| L3 | 64~1000 | 0.91 | ||
| Weight | kg | L1 | 3~10 | 7.5 |
| L2 | 9~100 | 9.5 | ||
| L3 | 64~1000 | 11.5 | ||
| Noise Temperature | dB | L1,L2,L3 | 3~1000 | ≤65 |
| ⁰C | L1,L2,L3 | 3~1000 | - 20℃~+90℃ | |
| Moment of inertia of reducer | Grade | Ratio | PX115 | |
| Moment of inertia: | kg.cm² | L1 | 3-5 | 2.85 |
| 7-10 | 1.95 | |||
| L2 | 9-50 | 2.15 | ||
| 70-100 | 1.85 | |||
| L3 | 64-350 | 2.05 | ||
| 400-1000 | 1.65 | |||
Inquiry - Planetary Gearbox PX115
