Share:
Eight Channel Standard Analog Controller
Category:
CONTROLLER SERIES
The primary function of the controller is to supply power to the light source while managing its brightness and on/off status.
Additionally, the controller can enable the light source to strobe by receiving a trigger signal, significantly extending its lifespan.
The digital controller also supports remote operation via PC equipment, allowing workers to select the appropriate controller type based on specific production needs.
Model :
Features :
- Exquisite appearance
- Easy to install
- Guide rail buckle design
- Many channels
- Operation panel front
- Silent fan
- Fast trigger response
- Good heat dissipation
- Constant current stable output/no flicker
Dimension :
.png)
Parameters :
| Project | Parameter | Illustrate |
| Control method | Constant current | - |
| Input voltage | 100-220VAC | - |
| Output voltage range | DC14.0 V~24.0 V | - |
| Number of channels | 8 channels | - |
| Manual adjustment | Have | Adjust by key |
| Remote adjustment | Have | Adjustment through host computer software |
| Brightness level memory | Have | After adjustment is completed, it will be automatically memorized after 8 seconds. |
| RS232 communication baud rate | 9600 | - |
| Adjustable brightness level | Level 255 | Long press the button for coarse adjustment, short press for fine adjustment: it can also be adjusted through the host computer software |
| Single channel output maximum power | 30W | - |
| External trigger method | Passive trigger, high and low level trigger switchable | Effective trigger voltage range: 5-24V DC |
| External trigger delay time | L, ON-OFF<5us | H, represents high level trigger; |
| H, OFF ON <5us | L, represents low level trigger; | |
| L, ON-OFF<5us | ON and OFF represent LED | |
| L, OFF ON <5us | The on and off state of the light source | |
| External trigger frequency | <1/T | Determined by the strobe time, if T=1 ms, the maximum external trigger frequency is 1KHz |
| Working environment | Temperature-10~50℃ | - |
| Humidity 20~80%RH non-condensing | - | |
| Storage environment | Temperature-20~70℃ | - |
| Humidity 10~90% | - | |
| Standby power consumption | <3W | - |
| Overall dimensions (mm) | 123X 125X 158mm | L × W × H |
| Weight | 1.25 Kg | - |
Technical Indicators :
| Model | Number of channels | Power/CH | Output voltage | external trigger |
| KM-DCS2.0-8C015W-24PS | 8 | 15W | 24V | Have |
Inquiry - Eight Channel Standard Analog Controller
