Share:


Four Channel Standard Analog Controller



The primary function of the controller is to supply power to the light source while managing its brightness and on/off status.
Additionally, the controller can enable the light source to strobe by receiving a trigger signal, significantly extending its lifespan.
The digital controller also supports remote operation via PC equipment, allowing workers to select the appropriate controller type based on specific production needs.


Model : 

 

Features : 
 
  • Exquisite appearance
  • Easy to install
  • Add guide rail buckle
  • Easy to operate
  • Operation panel front
  • Silent fan
  • More power
  • Good heat dissipation
  • Constant current stable output/no flicker
 

Dimension :



 

Parameters : 
 
Model Number of channels Power/CH Output voltage external trigger
KM-ACS2.0-4C015W-24PS 4 15W 24V Have
KM-ACS2.0-4C030W-24PS 4 30W 24V Have
 

Technical Indicators :
 
Project Parameter Illustrate
Control method Constant current -
Input voltage 100-220VAC -
Output voltage range DC14V~24V -
Number of channels 4 channels -
Adjustable brightness level Promise Adjust by potentiometer
Single channel output maximum power 30W -
External trigger method Passive trigger, high and low level trigger switchable Effective trigger voltage range: 5-24V DC
External trigger delay time L, ON-OFF<60us H, represents high level trigger;
H, OFF ON <60us L, represents low level trigger;
L, ON-OFF<80us ON and OFF represent LED
L, OFF ON <80us The on and off state of the light source
External trigger frequency <1/T Determined by the strobe time, if T=1 ms, the maximum external trigger frequency is 1KHz
Working environment Temperature-10~50℃ -
Humidity 20~80%RH non-condensing -
Storage environment Temperature-20~70℃ -
Humidity 10~55%RH non-condensing -
Standby power consumption <3W -
Overall dimensions (mm) 135×85×158mm L × W × H
Weight 0.9Kg -


 Inquiry - Four Channel Standard Analog Controller